ZIMMER MCS Modular Construction System

SERIES SO-101

PROFILE 10X20

• ▪ Groove width 5mm Standard length 2000 mm Other lengths


• ▪ available on request

SERIES SO-104

PROFILE 20X20

• ▪ Groove width 5mm Standard length 2000 mm Other lengths


• ▪ available on request

SERIES SO-105

PROFILE 20X40

• ▪ Groove width 5mm Standard length 2000 mm Other lengths


• ▪ available on request

SERIES SO-108

PROFILE 40X40

• ▪ Groove width 5mm Standard length 2000 mm Other lengths


• ▪ available on request

SERIES SO-111

Cover Cap

▪ To cover the profile section ends

SERIES SO-131

Cross Clamp

• ▪ The profiles are inserted into a groove so a very high angle stability is ensured releasing the fixing on one profile side.
• ▪ The profile can be moved parallelly and set the profile may be shifted in parallel and adjusted by loosening the mount on one side of the profile

SERIES SO-134

ANGLE FIXING

▪ For simple 90° angle fixing with low stresses

SERIES SO-141

SLOT NUT PIVOTING

• ▪ All Slot nuts made of galvanised steel with strip for centering


• ▪ Can be pivoted into any section of profile groove for normal fixing

SERIES SO-231

CLAMP

• ▪ Rigid clamp for fixing to all profiles
• ▪ Standard with pivoting Slot nut and screws

SERIES SO-232

CLAMP ADJUSTABLE

▪ Adjustable clamps for fixing to all profiles

▪Standard with pivoting Slot nut and screws

SERIES SO-251

ANGLE PIECE

▪ For adapting the following elements to right-angled surfaces

▪ Suitable for jointed angle pieces, suction fingers and tongs.

SERIES SO-261

JOINT ANGLE PIECE

▪ Suitable for angle pieces and suction fingers Joint swivels through 180°

SERIES SO-303

SUCTION FINGER SPRING-LOADED

• ▪ Spring-loaded suction cups for contact surfaces at right angles to suction cup
• ▪ Suitable for mini and bellows cups

SERIES SO-301

SUCTION FINGER

▪ Rigid suction finger for rectangular contact surfaces to suction cup

▪ Suitable for mini and bellows cups

SERIES SO-302

SUCTION FINGER ROTATABLE

▪ Suction fingers with swivel head for inclined surfaces to suction cup

▪ suitable for mini and bellows cups.

SERIES SO-304

SUCTION FINGER, SWIVELING AND SPRING-LOADED

▪ Spring-loaded suction finger with swivel head for contact inclined surfaces to suction cup

▪ Suitable for mini and bellows cups

▪ The suction cup can be adjusted for inclined surfaces uo to 45° Secured against rotation

SERIES SO-351

AIR DISTRIBUTOR

▪ To distribute compressed air and vacuum

SERIES SO-431

GRIPPER FINGERS

▪ Swivel angle 90° Torque 90 Ncm